H1Z2Z2-K, optimized version

Vantagens

• Para uso externo
• Robust against mechanical impacts, Burial in professionally made cable trench inside or without protection system
• Redução da propagação da chama e da formação de gases de combustão tóxicos em caso de incêndio
• Inside the EU, and particularly on site, applicable for many building types as per local, legal implementation of EU CPR - Construction Product Regulation (EU) No. 305/2011, thanks to Dca Classification
• 25 years in expectable lifespan under normal use conditions as defined in EN 50618

Âmbitos de aplicação

• For free and stationary or for freely suspended outdoor and indoor cabling between the solar modules, or between the module strings and the DC/AC inverter, for example in line with HD 60364-7-712 on PV systems, and EN 50618 on H1Z2Z2-K cable type, etc....; Short circuit and earth fault protected per EN 50618, Annex A, and per HD 60364-5-52
• As per EN 50618, Annex A, inside electrical installation pipe/ duct/ channel, plaster, and appliance, as well as inside or connected to double insulated/ protected appliance or system of protection class II
• Photovoltaic systems with DC system voltage up to 1800 V to ground
• AD8: Permanent water contact and submersion down to 1 metre in water depth
• Increased, mechanical robustness, for instance in the event of impact;
  Burial in Ground in professionally made cable trench (see Section 4.2 of VDE 0891-6, or Section 300.5 in Article 300 of NFPA 70/ NEC - National Electrical Code of the USA) with or without additional protection system, such as tube/ duct/ conduit for burial in ground;
  Where additional protection system for burial in ground is used, internal waterlogging of contaminated water in contact with the cable's outer sheath must be avoided.

Características do produto

• Weather/ UV resistant per EN 50618 as well as ozone resistant per EN 50396;
  Transversely watertight "AD8" per IEC 60364-5-51/ HD 60364-5-51, IEC 62440, and EN 50525-2-21
• Flame retardant per IEC 60332-1-2, and Dca classified per EU CPR - Construction Product Regulation (EU) No. 305/2011
• Halogen-free according to IEC 60754-1 (amount of halogen acid gas),
  Low Corrosiveness of combustion gases according to IEC 60754-2 (degree of acidity)
• Boa resistência a fendas e abrasão
• Tested against burial-related, mechanical UL 854 Tests Impact-Resistance and Crushing-Resistance

Referências às normas / Aprovações

• H1Z2Z2-K type certified according to EN 50618
• Versões com diferentes seções transversais mediante solicitação

Projeto do produto

• Condutor de fios finos de cobre estanhado
• Core insulation made of cross-linked copolymer
• Revestimento externo feito de copolímero reticulado
• Cor da cobertura: preto, vermelho ou azul
• Further single colours for the outer sheath on request

Classificação ETIM 5

• ETIM 5.0 Class-ID: EC001578
• Descrição de classe ETIM 5.0: Cabo flexível
• 

Classificação ETIM 6

• ID da classe ETIM 6.0: EC001578
• Descrição da classe ETIM 6.0: Cabo flexível
• 

Projeto do condutor

• Fio fino de acordo com VDE 0295,
  classe 5/EMC 60228 cl.5
• 

Raio de flexão mínimo

• 4 x OD
• 

Tensão nominal

• AC U₀/U: 1.0/1.0 kV
  DC U₀/U: 1.5/1.5 kV
  Max. permissible DC operating voltage: 1.8 kV
• 

Tensão de ensaio

• AC 6500 V
• DC 15000 V
• 

Capacidade da corrente

• Im compliance with EN 50618
• Acc. to EN 50618, reduction factors for clustered wiring per... HD 60364-5-52
• 

Faixa de temperatura

• >Conductor..., max., per EN 60216-1: 120°C;
  >Conductor..., max., short-circuit/ earth fault (period of max. 5 s): 250°C;
  >Ambient..., min., stationary use: -40°C;
  >Ambient..., min., flexible use or during installation: -25°C;
  >Ambient..., max., in conjunction with EN 60216-1: 90°C;
  >Ambient..., constant, in conjunction with HD 60364-7-712: 70°C to 90°C;
  >Ambient..., ambient temp. related reduction factor 1.00: 60°C;
  >Ambient..., max., storage: 40°C
•